This product is a high-strength inorganic adhesive specially developed to address the limitations of ordinary cement mortar, which is not suitable as a protective layer for insulation systems. It can replace various organic adhesives and improve the overall quality and durability of thermal insulation systems. As an environmentally friendly and energy-saving building material promoted by national standards, it is part of the polymer dry-mixed bonding mortar series. It is mainly used in interior and exterior wall insulation systems and serves as a cement-based dry powder mortar for bonding XPS and EPS insulation boards.
Quality Assurance
Provides excellent resistance against cracking, hollowing, dehydration, water penetration, and surface damage.
High Bonding Strength
Features strong adhesion, excellent flexibility, high softening coefficient, freeze-thaw resistance, and superior aging resistance.
Non-Toxic and Odorless
Pollution-free, safe, and environmentally friendly.
Easy Application
Fast drying and convenient construction process.
Application Process
① Before application, clean the wall surface thoroughly to ensure it is free from dust and impurities.
② Mix the dry powder with water at an approximate ratio of 4:1, and adjust the consistency according to construction requirements.
③ The mixed material should be used within 2 hours. Prepare and use in small batches to prevent moisture loss and drying.
④ The construction temperature should not be below 5°C. Avoid direct sunlight, strong winds, or rainy weather during application.
⑤ Do not mix with cement, sand, antifreeze, or other chemical additives during use.
⑥ Store the product in a cool, dry, and well-ventilated environment, avoiding moisture exposure.
⑦ This product contains alkaline components that may cause skin irritation. Proper protection for skin and eyes is required, and gloves are recommended during operation.
Application Areas
① Protective anti-crack plastering layer for polystyrene boards and extruded polystyrene boards.
② Anti-crack plastering layer for expanded vitrified bead insulation mortar, polystyrene particle insulation slurry, and other thermal insulation materials.